Econ™ 80 Size:Trial Kit (1.9 lbs. / 0.86 kg.) Specifications Met

Specifications Met

solvents (intermittent contact) and can be primed/painted or bonded to other surfaces (any release agent must be removed) using Urebond or similar flexible adhesive

The convex side is great for compressing clay and knocking out the air bubbles

Taper Burr (TX-18-EC)

Use a release agent made specifically for mold making (Universal™ Mold Release or Mann’s Ease Release™ 200 available from Smooth-On or your Smooth-On distributor)

Econ™ 80 Size:Trial Kit (1.9 lbs. / 0.86 kg.) Specifications MetEcon 80 is an economical Shore 80A urethane rubber suitable for a variety of mold making and industrial applications. It is a lower cost, faster cure alternative to our popular PMC 780. Physical properties are lower vs. PMC 780. This is a no odor system that features a 1A: 1B mix ratio and a low viscosity for easy mixing and pouring. Working time is about 13 minutes at room temperature, handling time is 6 hours and rubber cures overnight. Econ 80 is