Altex 2K Additive Water Toys Minimum 4ft or maximum 8ft

Minimum 4ft or maximum 8ft of chimney is required

In the event you are separated from the dive boat you can be seen and identified in the water

Depth (22012D)

making the strength high

Anodised shafts

Altex 2K Additive Water Toys Minimum 4ft or maximum 8ftDesigned to be used in Altex Yacht & Boat Regatta Gloss Enamel to convert the film into a cross linked (2K) acrylic Accelerates the cure of Regatta Gloss Enamel top coat Depending on addition rate, will reduce dust free dry times by up to 50% Increased hardness of the cured film Increases flow and ultimate gloss level Reduces time to be able to mask out areas Can also be used in AY &B Timbercote Varnish where multiple coats are required to reduce time