KTM Heim (lower shock bearing press) models 2017 onwards pre-order which grow horizontally

which grow horizontally

There are two very similar Ferrex machines - the 37K is identifiable by the model label attached to the machine and the grey front grille

A key feature of the installation tool is a relief to precisely fit the bearings allowing space for the bearing seal

Please note the pull rod bearings cannot be pressed out and should be removed by a suitable drift or blind bearing puller

which allow fitment of any mirror with a 22 mm clamp

KTM Heim (lower shock bearing press) models 2017 onwards pre-order which grow horizontallyThis tool is designed for easy removal and installation of the KTM PDS lower shock bearing on KTM enduro bikes from 2017 onwards where the Heim bearing outer diameter is 28 mm. The long side of the tool is used to push the old bearing out and the short side of the tool has a shoulder, which is precisely machined to centre the new bearing in the swingarm without the need for measurement or adjustment. This tool eliminates the risk of damage to the